No person may list an airport as an alternate airport in a dispatch or flight release for a turbine engine powered airplane unless (based on the assumptions in § 121.195 (b)) that airplane at the weight anticipated at the time of arrival can be brought to a full stop landing within 70 percent of the effective length of the runway for turbopropeller powered airplanes and 60 percent of the effective length of the runway for turbojet powered airplanes, from a point 50 feet above the intersection of the obstruction clearance plane and the runway. In the case of an alternate airport for departure, as provided in § 121.617, allowance may be made for fuel jettisoning in addition to normal consumption of fuel and oil when determining the weight anticipated at the time of arrival.
libjpeg-turbo is a fork of the original IJG libjpeg which uses SIMD to accelerate baseline JPEG compression and decompression. libjpeg is a library that implements JPEG image encoding, decoding and transcoding.
Turbo Render is designed with ease of use being a top priority. In the Turbo Render Options area, simply click enable, choose a sample pre-set to automatically set up the sample settings to the desired quality, choose the cleaning mode (combined image or clean passes), tell it what's in the scene, and render. That's it! Turbo render will then analyse the scene and other render settings to produce the final render. IMPORTANT ensure a default project cache folder for new scenes is specified in the addon preferences, and that each scene has a valid cache folder set prior to rendering. The scene's cache folder can be set at the bottom of the Turbo Render options, or in the compositor's N panel turbo tab. If you the 'User' sample pre-set, then to achieve the biggest speed gains, you should reduce your samples below what you would usually need. The cache folder must not be a relative path (a path that starts with '//'), so when setting it, make sure you uncheck the relative option in the Blender file explorer as shown below:
Blender Crashes - This could happen if there's a conflicting addon or if you've accidentally download the wrong zip file for your Blender version. First check the zip file ends with your Blender version, for example, 'blender_turbo_boost_v_2_0_5_ for blender3_1_0' is only compatible with blender 3.1.0. If you are using the correct zip file, try installing the addon after starting Blender in factory mode to ensure there are no conflicts. You can open blender with the factory start-up using the file named 'blender_factory_startup.cmd' from the blender folder. After installing Turbo Render in factory mode you can then re-install your old addons until you find the addon responsible for the conflict. Ensure that addon is turned off when using Turbo Render in future. Another possibility is that you're using E-Cycles with it's own denoiser enabled (Turbo Render is not currently tested with any engine other than Cycles, but I intend to look into ensuring full compatibility with other engines such as E-Cycles at a later date).
Parts or all of the render are black after using Turbo Render - Firstly make sure your computer meets the minimum specifications below for the resolution you're trying to render. If so, check the f12 key is assigned to the turbo tools render operations, check the below troubleshooting step (nodes left in the tree after rendering). If non of the above, then this is a known bug in Blender that affects the open image denoiser (which this addon uses). In that case please subscribe to one of the many open bug reports on the blender bug tracker. Here's one of them: . In the meantime, try and reduce system resource usage during rendering, and if possible render at a lower resolution, or on a machine with more RAM.
If it happens and you've done nothing else since rendering, press ctrl z to put the tree back to it's pre-render state, then press 'refresh all' in the compositor's turbo tools panel to refresh the cache with the new render data.
turn off any passes that shouldn't be enabled (turbo render will have turned on additional passes before beginning rendering so that it can multipass denoise). Generally the sockets shown on the render layer cache node indicate which passes you had on previously if you're unsure.
Many of you know how important timing is for both safety and performance. If ignition timing was delayed all the time, this would greatly diminish performance. This is why the delay is programmed to happen only when you lift your foot off the accelerator pedal. This way the pop & bang is present but it by no means reduces the performance abilities of your car. In fact, for turbocharged cars, it even improves them.
This improvement comes from the fact that fuel is not cut off during deceleration and the flame front spreads later. The result is a flow through the exhaust even while decelerating. This flow keeps the turbo spooling, so the next time you press the pedal you will not experience the all too familiar and hated turbo lag since the exhaust side of the turbo never stops spinning. This enables the compressor side to provide instant boost once the pedal is pressed again and the throttle valve opens to let the air into the engine.
Since this process eliminates the turbo lag, thus improving response and performance, pop and bang is also known as anti-lag system (ALS). And in our experience the better the response, the more satisfied the driver. Agree?
Turbo is not a requirement for pops and bangs, since the most important segments are the delays in ignition and fuel cutoff. The only difference between cars with and without turbo is that turbocharged cars will benefit from the anti-lag feature.
The amount of fuel and the level of ignition delay provide lots of space for customization of your pop and bang remap. However, there are a few things to consider if you seek a safe and smooth ride. In order to provide our customers with safety, but also allow some level of customization, we have created two stages of pop & bang tuning.Most people who aim for custom pops and bangs require a more intensive sound. Going too far with the modifications can be very detrimental to the valves, exhaust and even turbo. Many stock parts are not designed to withstand extreme temperatures and pressures which are inevitably created during the most aggressive pops and bangs.
Aside from pops and bangs, we also offer other performance and sound improvement services such as performance tuning stages 1, 2, 3 and 4, flat shift (No-Lift Shift) which enables faster shifting and improved turbo reaction, hardcut limiter, launch control, map switching and much more. 2b1af7f3a8