upgrade from version 2 to version 3 is in progress. This is both simplerand faster to have the whole structure, and Parsic will now make the first 3Dsound. In principle, there are only interior 3D, by this there is no longera top material, so we can implement an interior 3D-sound by layer. If you enter a character here, it is not placed in the layer anyway.
following dialog enter the name RB.3. Like also at the signals,you can turn over the function of the output or input with a clickon the Invert-Button. As you have placed RB3 on an output of anobject now, Parsic will program the PIC RB3 during initializationas an output, also.
Parsic 4.0 is ready to start. For this purpose, you need to remove the microSD-Card and put it in again. After this, you need to program all RB1-3 and RB5. If you start the program with the button, you can initialize RB1,2 and 3. RB1,2,3 will be programmed more or less continuously, while RB4 is initialized only once and stays empty. Because RB1,2,3 are now outputs, RB3 should also be completely empty. Be aware that the objects you think should be initialized, are also initialized if you start Parsic with the button. 7211a4ac4a